HomeReviewsMachines, Equipment, and ToolsEquipmentCraftsman 1000w Halogen WorklightBulb Installed

Craftsman 1000w Halogen Worklight

Bulb Installed

Once the bulb is installed, make certain that the bulb is firmly in place with no forward and back movement. Next, carefully lift the lens cover into position and with the cover aligned on the light correctly, apply enough pressure to allow the center screw on the light to be tightened back down. Be careful that you don't get the threads crossed due to misalignment (this is easy to do with the cover trying to push away from the screw because of the pressure necessary to fit the lens into position), the pot metal used for the lens cover is very soft and the threads in the hole can strip very easily. Repeat for the other light. Photo: Ryan King, 2006.

Assembly Procedure Image Gallery | Image 20 of 25

U.S. Military Name Tapes Link